WATER DAMAGE RESTORATION & MOULD REMEDIATION INNER WEST
Most of the Inner West went up before damp-proofing was standard. Its Victorian and Federation terraces sit on porous sandstone footings, solid brick pulls moisture up, and packed streets give it nowhere to dry, so rising damp, water damage, and mould growth are constant companions. Water Damage & Mould Specialists is the certified team that fixes it, with full water damage restoration and mould remediation across the region, IICRC-trained technicians, calibrated moisture meters, and clear insurance-ready reports.
IICRC-CERTIFIED WATER DAMAGE RESTORATION TECHNICIANS
24/7 EMERGENCY RESPONSE ACROSS THE INNER WEST
FREE MOISTURE ASSESSMENT WITH APPROVED WORK
INSURANCE-READY REPORTS TRUSTED BY AUSTRALIAN INSURERS
ADVANCED DRYING EQUIPMENT AND THERMAL IMAGING
RESIDENTIAL, STRATA, AND COMMERCIAL PROPERTIES COVERED
Rapid Response. Monitored Drying. Insurance Documentation Support.
IICRC-Certified Water Damage Restoration Technician
24/7 Emergency Response Across Sydney
Free Moisture Assessment on Approved Work
Insurance-Ready Reports Trusted by Australian Insurers
Advanced Drying Equipment and Thermal Imaging
Residential, Strata and Commercial Properties Covered
The Inner West's Standards-First Water Damage & Mould Team
Rising damp is the classic Inner West problem, and old terraces make it worse. Solid brick, absent damp-proofing, and low-lying streets that flood near the Cooks River turn a leak into mould fast. We cover Newtown, Marrickville, Balmain, and Leichhardt with water damage restoration and mould removal services.
One IICRC-certified Water Damage Restoration Technician signs off every job, working to the AS/IICRC S500 standard, the benchmark Australian insurers use. We map the affected areas with thermal imaging and moisture meters, tracing hidden moisture behind solid brick and party walls before the drying equipment goes on.
We look after residential and commercial properties across the Inner West, from Balmain and Rozelle terraces to the warehouse conversions of Marrickville. One certified crew stays with your job, from the first phone call through to the final signed-off report, and nothing is lost.
GET AN INSTANT FREE QUOTE!
Contact Us
We will get back to you as soon as possible.
Please try again later.
Why Inner West Property Owners Choose WDMS
The damage that lingers is the moisture you cannot see, deep in old brick. Our water damage restoration services find and dry it.
IICRC-Certified Standards
Our work follows the AS/IICRC S500 standard, the framework Australian insurers rely on, from first inspection to final report.
Real Moisture Readings
Numbers decide when a structure is dry, not appearances, so we read timber floors, plasterboard, subfloors, and carpets throughout.
Thermal Imaging Detection
Behind solid brick and party walls, thermal imaging finds damp without opening anything up, so the picture is clear on arrival.
Advanced Restoration Equipment
Trucks arrive stocked with extractors, commercial air movers, LGR dehumidifiers, and HEPA scrubbers, matched to the size of the site.
Insurance-Ready Reports
Your loss adjuster gets a full file, with dated photographs, sequential moisture readings, daily drying logs, and a clear scope of work.
24/7 Certified Response
A burst pipe at midnight cannot wait until nine, so our certified crews respond immediately, day and night, across the Inner West.
Water Emergency? Act Before It Spreads Across Your Inner West Property
Damp spreads through brick fast. A flash flood or burst pipe soaks plaster, skirtings, and floors, and left untreated it brings structural damage and mould growth. Act fast, our crew starts with water extraction, structural drying, and treatment to prevent mould.
What to Do Right Now
Turn the water off at the mains, or isolate the appliance that failed if it is safe to reach.
Switch the power off at the switchboard and keep clear of any contaminated water or sewage.
Move furniture, rugs, and valuables clear of the wet area and photograph the damage for your claim.
Call WDMS on 0401 646 666 for immediate advice and a same-day emergency callout.
24/7 Emergency Response
Speak directly with a trained restoration specialist for clear guidance and rapid assistance.
Free emergency advice and insurance-ready documentation available with eligible restoration work.
what we do
Our Restoration Services Inner West
Flash flooding and rising damp need different work, so we offer a comprehensive range of damage restoration services in Sydney's Inner West, a full range of services for the affected areas.
Additional Restoration Support
Alongside water damage restoration, structural drying and mould remediation, WDMS can also assist with fire and smoke damage restoration, including emergency make-safe work, soot removal, smoke-odour treatment and restoration documentation.
Mould Remediation
Professional mould remediation services cover containment, HEPA filtration, mould removal, and mould cleaning, then treat the moisture source, all under a 12-month warranty.
Mould Inspection and Testing
A free mould inspection comes with approved remediation work. Experienced technicians check for visible mould, damp-affected areas, and hidden dampness, then explain the findings.
Water Damage Restoration
A failed roof, a burst pipe, or rising damp calls for water damage restoration services: moisture assessment, water extraction, structural drying, and full documentation.
Flood Damage Restoration
After flash flooding, storm flooding, or a Cooks River overflow, our flood restoration services clear the standing water, then controlled drying restores the structure.
Emergency Water Extraction
The faster standing water comes out, the less it wrecks, so our extraction services pull it from carpets, floors, and subfloors, limiting further damage.
Structural Drying Services
Solid brick, timber, and plaster each hold water differently, so our structural drying services pair air movers with dehumidifiers, guided by daily moisture readings.
Wet Carpet Drying
Caught quickly, soaked carpets and underlay are restored to their original condition, with water extraction, drying, and mould cleaning to finish.
Sewage Damage Cleanup
Sewage and floodwater are hazards, not just water. Cleanup services cover extraction, cleaning, and sanitising, with materials treated or removed to stop future growth.
Commercial Water Damage Restoration
For a business, every closed day costs money, so our water damage restoration services keep shops, cafes, and studios trading, with after-hours access.
Our Restoration Process Inner West
Good results come down to method. Every Inner West callout follows the same six-step process, whether it is a soaked Newtown terrace or a flooded Marrickville warehouse.
Step 01
Emergency Call and Initial Guidance
You reach a trained technician, not a call centre. While the crew heads to your property, we talk you through the safety basics, cutting the power, isolating the appliance that failed, and stopping the water at its source.
Step 02
Inspection and Moisture Mapping
Before the equipment comes out, we map it. Thermal imaging finds concealed moisture behind plaster, ceilings, and shared party walls, while moisture meters read timber, plasterboard, and carpets.
Step 03
Water Extraction and Damage Control
With the picture clear, we pull out the standing water with pumps and truck-mounted extractors, then protect the rest, stopping further damage to flooring.
Step 04
Structural Drying Setup
Next we set the drying going. Air movers, dehumidifiers, and cavity systems are placed for the materials and moisture readings on site, not a template.
Step 05
Daily Readings and Live Adjustments
Guesswork has no place in drying. Daily readings against the S500 standard tell us where to move equipment and add capacity while moisture levels stay high.
Step 06
Final Assessment and Documentation
Only when every reading confirms the property is dry do we finish, cleaning and sanitising the affected areas, applying mould treatment where needed, and handing over photos, readings, and drying logs.
Professional Drying Equipment on Every Inner West Job
Household fans and a wet vacuum cannot fix real water damage. Saturated timber, wet plaster, and moisture in old brick need restoration-grade equipment sized to the space. Here is what our crew brings to every callout.
- Industrial grade pumps that clear standing water from carpets, tiled floors, and subfloors
- Truck-mounted extractors that shift large volumes across homes and commercial sites in a single pass
- LGR dehumidifiers that pull stubborn moisture out of humid, tightly built terraces
- Desiccant dehumidifiers for timber-heavy jobs and tight, hard-to-reach drying targets
- Axial fans that keep steady airflow across wet plaster, carpet, and open floors
- Injectidry cavity systems that push dry air behind walls and into subfloor voids
- Calibrated meters that read timber, plasterboard, and solid brick against S500 targets
- Thermal imaging cameras that reveal hidden moisture the naked eye would miss
- HEPA air scrubbers that filter airborne spores during mould removal and contaminated cleaning
- ULV foggers that apply antimicrobial mould treatment across the affected areas
Every unit is chosen for the reading it must shift, and its runtime is logged.
Inner West Coverage for Every Property Type
Our service areas take in every kind of Inner West home, from solid-brick terraces in Balmain, Glebe, and Annandale to warehouse conversions in Marrickville and Camperdown, each with its own moisture issues our restoration services in Sydney's Inner West are built to handle.
Homes and Family Residences
Terraces still have to be lived in while they dry, so across Newtown, Leichhardt, and Petersham our experienced team stages the work to keep kitchens usable and children and pets clear.
Apartments and Strata Blocks
Strata and shared terraces run smoothly only when everyone stays informed, so across Balmain and Glebe we coordinate with owners, tenants, and managers, backed by dated readings.
Terraces and Heritage Homes
Victorian terraces on sandstone footings, with little damp-proofing, suffer rising damp through solid brick. We trace the moisture, protect the property's structure, and dry the cavities.
Commercial and Retail Properties
Shops, cafes, and warehouse studios cannot afford to close, so we stage water damage restoration services around trading hours, with screened zones and after-hours access.
Rental and Managed Properties
Property managers answer to owners, tenants, and insurers at once, so we keep the paperwork simple, one file of time-stamped photos, moisture logs, and a clear scope, no chasing.
24/7 Water Damage Restoration & Mould Remediation Sydney
Fast, professional help for floods, burst pipes, hidden moisture and mould. We provide emergency water extraction, moisture-monitored structural drying and professional mould remediation for residential and commercial properties across Sydney.
We Make Inner West Insurance Claims Easier
Most water damage claims stall on paperwork, not on cover. Our experienced team builds your water damage restoration file as the work runs, so your insurer or loss adjuster gets it in one place, and where authorised, we assist them directly.
- Insurance-ready documentation formatted the way Australian insurers expect
- Dated photographs of every affected area
- Sequential moisture readings across cavities and carpets
- Daily drying logs signed off by certified technicians
- A written scope of work aligned to the AS/IICRC S500 standard
- Direct contact with your insurer or loss adjuster whenever you need it
Frequently Asked Questions (FAQs)
Can you remediate mould yourself?
A small patch under a square metre on a hard, non-porous surface can usually be handled yourself with white vinegar and protective gear. Anything larger, anything on porous plaster, or anything that keeps returning needs professional mould removal, with the containment, HEPA filtration, and moisture-source correction that household methods cannot manage.
How do you know if your house has toxic mould?
The usual signs are a musty smell, dark patches on walls or ceilings, salt residue low on the brickwork, and symptoms like a cough or blocked nose that ease once you leave. Confirming whether it is genuinely toxic needs a professional mould inspection with air-quality testing, backed by moisture readings across the affected areas.
How do you get rid of mould permanently?
Mould goes for good only once the moisture behind it is fixed, not just the surface stain. Mould removal traces the source, whether rising damp, a leak, or poor ventilation, then dries the structure and adds preventive measures so it stays mould free.
Is professional mould removal worth it?
Beyond a small patch, yes. Larger affected areas, mould that keeps returning, and homes with children or vulnerable residents warrant it. Professional removal handles the health risk, structural damage, and hit to property value at once, which is why insurers recommend it.
How do you remove mould yourself?
Wear a P2 mask and gloves, open the room for ventilation, and wipe with a wet cloth rather than scrubbing dry, which sends spores into the air. White vinegar works well on hard surfaces, but bleach does not suit porous ones. If the patch is larger than a square metre or returns after cleaning, stop and call a professional mould removal company.
What permanently kills mould?
Nothing off the shelf kills mould for good, because mould is a moisture problem in disguise. Treatment clears what is there now, but lasting results come from fixing the cause: repairing leaks and keeping humidity down so the treated area stays dry.
How do you get rid of black mould?
Black mould is best left to professionals because of the health risk. We start with a mould inspection, then containment, HEPA filtration, mould removal and mould cleaning, an eco-friendly treatment, drying, and correcting the source so the treated area stays clear. In a bathroom, ceiling, or wall cavity, it is not a safe DIY job.
How long does mould removal take?
Timelines run from a few hours to a couple of days, depending on how far the mould has spread, the affected areas, and whether extra drying is needed. Larger commercial jobs take longer, with a timeframe after the inspection.
How much does mould remediation cost in the Inner West?
It depends on the size of the affected area, where the mould is, and whether extras like air-quality testing or structural drying are involved. Every quote follows a proper inspection, so the price reflects the real work, with nothing hidden.
Need Water Damage or Mould Sorted Fast Across the Inner West?
From rising damp to a burst pipe, whatever the water damage, the answer is the same, a certified team on site fast, often same day. Our IICRC-trained technicians handle water extraction, mould inspections, and full professional mould remediation services in Sydney's Inner West.
he WDMS Standard on Every Inner West Job
✔ IICRC-Certified Water Damage Restoration Technicians
✔ 24/7 Emergency Response Across the Inner West
✔ Free Moisture Assessment With Approved Work
✔ Insurance-Ready Reports Trusted by Australian Insurers
✔ Advanced Drying Equipment That Delivers Lasting Results
✔ Residential, Strata, and Commercial Properties Covered
Save the Property. Beat the Mould. Book WDMS.
Send us a few photos and a note on what happened, and we call you back with a plan and a crew on the way. The sooner you contact us, the more of your property we can restore, and the smoother your claim.
24/7 Emergency Response · IICRC-Certified Technician · Free Moisture Assessment · Insurance-Ready Reporting